Spring 2022 Course Syllabus
Course: PTAC-1432- Section: 50H
Process Instrumentation I
LSCPA Logo Image
Instructor Information
Instructor Kenneth Ballou
E-mailballoukw@lamarpa.edu
Phone(409) 984-6418
Office
Location:Umphrey Industrial Technology Center - Room: 201 A
Hours:By appointment only.
COVID 19 Information The Lamar State College Port Arthur (LSCPA) Student Code of Conduct COVID 19 Policy requires students who have been exposed to COVID 19 or diagnosed with COVID 19 to report their condition on the COVID 19 Notification Form (available via a link on the Student Code of Conduct COVID19 webpage). This information will be provided to the Dean of Student Services. In addition, this policy requires all students to wear face coverings in compliance with the criteria included in the policy. For more information please refer to the COVID 19 link on the LSCPA website.
Course Information
Description Study of the instruments and control systems used in the process industry, including terminology, process variables, symbology, control loops, and basic troubleshooting.
Prerequisites PTAC-1302 or Concurrent
Learning Outcomes 1. Explain the functions of the various instruments used in the process industry. (PSLO 1); measured by embedded test questions, demonstration and hands on operation

2. Utilize terms and symbols used in process instrumentation. (PSLO 1); measured by embedded test questions, demonstration and identification of components

3. Interpret process flow diagrams, piping and instrumentation drawings used in the process industries. (PSLO 2); measured by embedded test questions, class discussion, demonstration and hands on use of drawings

4. Diagram the process control elements in a control loop. (PSLO 2); measured by embedded test questions, demonstration and hands on identification of components

5. Identify and adjust the various instruments used in the process industries. (PSLO 3); measured by embedded test questions, demonstration with actual process equipment

6. Demonstrate safety procedures used during cleaning out, isolation and repair of process instruments. (PSLO 4); measured by embedded test questions, class discussion and demonstration on actual process equipment
Core Objectives
Program Student Learning Outcomes 1. Use technology to access operator-specific documentation and training.
2. Identify specific equipment and operating parameters to meet industry standards.
3. Describe the principles of quality control.
4. Diagram the process control elements in a control loop.
5. Identify basic processes, equipment, and systems to meet industry standards.
6. Implements standard safety procedures as required in industry.
Textbooks Textbook Purchasing Statement: A student attending Lamar State College Port Arthur is not under any obligation to purchase a textbook from the college-affiliated bookstore. The same textbook may also be available from an independent retailer, including an online retailer.

Process Instrumentation (2020 Edition), Publisher-Pearson, 2nd Edition: ISBN 9780135213926 (paperback)
ISBN 9780135213957
Lecture Topics
Outline
Week 1: Introduction to class; course syllabus; Blackboard instructions
Week 2: Introduction to Instrumentation.
Week 3: Process Variables, Elements, and Instruments: Pressure
Week 4: Process Variables, Elements, and Instruments: Temperature
Week 5: Process Variables, Elements, and Instruments: Level
Week 6: Process Variables, Elements, and Instruments: Flow
Week 7: Process Variables, Elements, and Instruments: Analytical
Week 8: Process Diagrams and Instrumentation Symbology
Week 9: Spring Break; No classes.
Week 10: Switches, Relays, and Alarms
Week 11: Signal Transmission and Conversion.
Week 12: Introduction to Control Loops: Simple Loop Theory.
Week 13: Control Loops: Primary Sensors, Transmitters, and Transducers.
Week 14: Control Loops: Controllers and Final Control Element Overview
Week 15: Control Loops: Control Valves and Regulators
Week 16: Final Exam Prep
Major Assignments
Schedule
Week 1: Introduction to class; course syllabus; Blackboard instructions. Chapter 1: Introduction to Instrumentation.

Week 2: Chapter 1: Introduction to Instrumentation. Complete end of chapter questions by end of week.

Week 3: Chapter 2: Process Variables, Elements, and Instruments: Pressure. Complete end of chapter questions by end of week.

Week 4: Chapter 3: Process Variables, Elements, and Instruments: Temperature. Complete end of chapter questions by end of week. Review for Exam 1.

Week 5: Exam 1 (Chapters 1-3) Chapter 4: Process Variables, Elements, and Instruments: Level. Complete end of chapter questions by end of week.

Week 6: Chapter 5: Process Variables, Elements, and Instruments: Flow. Complete end of chapter questions by end of week.

Week 7: Chapter 6: Process Variables, Elements, and Instruments: Analytical. Complete end of chapter questions by end of week.

Week 8: Chapter 7: Process Diagrams and Instrumentation Symbology. Review for Exam 2. Exam 2 (Chapters 4-7) Complete end of chapter questions before taking exam.

Week 9: Spring Break; No classes.

Week 10: Chapter 8: Switches, Relays, and Alarms. Complete end of chapter questions by end of week.

Week 11: Chapter 9: Signal Transmission and Conversion. Complete end of chapter questions by end of week.

Week 12: Chapter 10: Introduction to Control Loops: Simple Loop Theory. Complete end of chapter questions by end of week.

Week 13: Review for Exam 3. Exam 3. Chapter 11: Control Loops: Primary Sensors, Transmitters, and Transducers. Complete end of chapter questions by end of week.

Week 14: Chapter 12: Control Loops: Controllers and Final Control Element Overview. Complete end of chapter questions by end of week.

Week 15: Chapter 13: Control Loops: Control Valves and Regulators. Review for Exam 4.

Week 16: Exam 4. Complete end of chapter questions before taking exam. Final exam prep.

Final Exam Week: Last class day is May 12th.
Final Exam Date May 9, 2022 - 6:00 AM   Through  May 12, 2022 - 11:59 AM
Grading Scale  90 - 100=A    80 - 89=B    70 - 79=C     60 - 69=D    Below 59 = F
Determination of
Final Grade
Chapter Tests-30%, Quizzes/homework-30%, Final Exam-30%, Attendance/Labs-10%
Course Policies
Instructor Policies I will not discuss your grades over the phone or by e-mail. If you want to discuss your grades, you must
come to my office in person.

You will have 4 Major Tests and a Final Exam in this class. All tests and the exam are taken in class on Blackboard. There are "NO MAKEUPS OR RETAKES" if instructor is not notified.

Homework must be completed on time, 15 PTS will be deducted each class day late, for two class days.
Homework more than 2 class days late will not receive a grade higher than 50.

Students that are disruptive in class will be asked to leave and counted absent for the day.

E-Mail/Voice Mail Etiquette:
Students must use appropriate e-mail etiquette when corresponding with instructor. For example, complete
sentences and a full subject line with your name/course name. Voice mail messages should be clearly
spoken identifying students name, course, and any return phone number.

Taking the Final Exam is required to complete the course.

Attendance Policy Poor attendance is a leading reason for termination from a job in all areas of employment. With this factor
in mind, the instructor monitors student attendance daily. In addition, attendance on a regular basis is
necessary for proper skill development. A tardy is an absence for attendance purposes.

4 absences = one letter grade drop
6 absences = two letter grade drop
8 absences = automatic failure of class

Students are responsible for completing all assigned homework, including reading assignments, by the
required due dates and for being prepared for each class meeting. This applies even if you were absent
from the previous class meeting.
Academic Honesty Academic honesty is expected from all students, and dishonesty in any form will not be tolerated. Please consult the LSC-PA policies (Section IX, subsection A, in the Faculty Handbook) for consequences of academic dishonesty.
Facility Policies
  1. No food or tobacco products are allowed in the classroom.

  2. Only students enrolled in the course are allowed in the classroom, except by special instructor permission.

  3. Use of electronic devices is prohibited.
Important Information
ADA Considerations The Americans with Disabilities Act (ADA) is a federal anti-discrimination statute that provides comprehensive civil rights for persons with disabilities. Among other things, this legislation requires that all students with disabilities be guaranteed a learning environment that provides for reasonable accommodation of their disabilities. If you believe you have a disability requiring an accommodation, please contact the the Office for Disability Services Coordinator, Room 231, in the Madison Monroe Building. The phone number is (409) 984-6241.
MyLSCPA Be sure to check your campus E-mail and Course Homepage using MyLSCPA campus web portal (My.LamarPA.edu). When you've logged in, click the email icon in the upper right-hand corner to check email, or click on the "My Courses" tab to get to your Course Homepage. Click the link to your course and review the information presented. It is important that you check your email and Course Homepage regularly. You can also access your grades, transcripts, and determine who your academic advisor is by using MyLSCPA.
Other
HB 2504 This syllabus is part of LSC-PA's efforts to comply with Texas House Bill 2504.
Department
Business and Industrial Technology
Chair:Sheila Guillot
E-mail:guillsr@lamarpa.edu
Phone:(409) 984-6381

If you have a grievance, complaint, or concern about this course that has not been resolved through discussion with the Instructor, please consult the Department Chair.